本插床可插各種大、中型零件內外平面、型面和鍵槽等粗精加工。
滑枕往復動動可在工作中調速、不必停車。
滑枕、工作臺和油泵都是單獨電動機帶動。
插削速度可以無能調整.
機床設有各種安全裝置。機床附有電磁自動抬刀的刀架和刀桿。刀架用天外插削，刀桿用于內插削和插鍵槽。
This slotting machine is designed of machining various kinds of large or medium sized machine parts.
IT is used for slotting various flat surface,straight external and internal form surface,keyways,etc,The slotting speed may be regulated infinitely.
The machine is acconpained with an electro magnetic tool holder and a too bar.The toolholder is used for outer slotting and the tool bar for inner slotting and for slotting the keyway.

技術規格 MAIN SPECIFICATIONS

最大插槽長度（插削內孔1000mm）	max.siotting(1000mm for internal slotting)	1250mm
切削行程速度	cutting stroke speed	4-30m/min
返回行程速度	return stroke speed	7-35mm/min
可插削工作的最大重量	max.weight of the workpiese for slotting	4500kg
主傳動電機功率	power of main drive motor	37kw
允許最大切削力（當行程速度為10米-20米/分時）	max.table cutting force(withinran traverse speed of 10-20m/min)	24500N
工作臺直徑	Table diameter	1400 mm
工作臺的最大移動量	Max .table traverse longitudinal cross	縱向1400mm 橫向1120mm 回轉360度
刀具支承面至床身前壁距離	Distance between tool holding surface and column fornt	1600mm
進給量范圍縱向橫向圓周(ф700圓周上)	Rang of feed Longitudinal Cross Circular(along ф700 Circular)	0.2-3mm/double stroke 0.2-3mm/double stroke 0.1-5mm/double stroke
工作臺面至滑架下端間距離	Distance bdtween worktable and lower side of slide	1650mm
工作臺快移:縱向及橫向	Ttable rapid traverse speed ,longitudinal or cross	500m/min
機床外形尺寸(長寬高)	Overall dimension(LWH)	460032006760mm
機床總重量(包括電氣設備)	Total weight of machine(including electrical equipment)	26t

返回上一步: 打印此頁

上一條：B50100
下一條：B5050A

產品中心

撫順機床

B50125